Steps to Rebuild the Camera
1.       Take the frame and carefully put the ciruit board in place.
2.       Place the small lens into the camera with the flat face up.
3.       Put the black cover in place on top of the small lens.
4.       Take the sliding cover and place the hole on the peg and place the flat part on the black cover.
5.       Place the lens cover on and snap it into place.
6.       Take the copper spring and attach it to the tip of the sliding cover and the circuit board.
7.       Place the cog into the back of the frame.
8.       Put the sideways spring on the top thin peg.
9.       Put the black spiral piece into the hole and through the cog.
10.   Take the bottom gray piece and place it on top of the spring.
11.   Take the top gray piece and place it on the wide peg.
12.   Put the larger lens on the front.
13.   Put the gray cover on top of the larger lens.
14.   Put the film turner on top of the film holder.
15.   Put the counter on the top thin peg.
16.   Place the button frame on the film turner.
17.   Place the picture sight beside the button frame.
18.   Put the film reel in where the top holes fit in with the gear.
19.   Place the battery in.
20.   Put the covers on the frame.
WARNING CAMERA WILL NOT WORK
Subscribe to: Posts (Atom)